5 Stage System

Full Broadcast EPOXY GARAGE FLOOR

STEP 1

  

We diamond grind the concrete substrate to a comparable media blasting CSP-3,4 a aggressive surface profile will achieve a better mechanical bond between the substrate and the epoxy. We then  diamond grind all edges, holes, divots and cracks This insures our Industrial grade 2-part epoxy has a exceptional bond with concrete substrate preventing peeling and chipping.

STEP 2

  

We  repair and patch any cracks, holes or divots with a fast drying flexible epoxy.  

We then grind the patches where needed.

STEP 3

  

We measure and mix our industrial grade 2-part epoxy with 100% solids. We then pour the 2-part epoxy directly on the substrate as we spread it out and roll it in cross-roll pattern, to insure complete bond to your seamless beautiful finish.  This must be done with care and precision as well as urgency. This is your bond- coat. Our installer /technicians are well trained in assessing and manipulating the epoxy where needed. 

STEP 4

  

We broadcast flakes/chips with 100% coverage.  We continue to add additional  flakes/chips to ensure complete chip-coverage over the entire floor. Full chip/flake coverage provides better cushion and added protection for your floor surface. Once complete your floor will have beautiful uniform seamless finish. 

STEP 5

  

We lightly scrap and clean the floor before adding clear top coat of 100% solids epoxy, polyurea or polyasparic. This top coat has  UV protection and anti-slip added to the mix making it an extremely durable and safe finish.

COMMENTS

  

Important aspects of a successful resinous floor is installation are  preparation of the concrete substrate mixing of the Epoxy . Over all knowledge of the whole process and knowing the do's and don'ts  helps ensure a successful bond and an amazing looking floor.